It does not need extra systems such as trichomat, clack or check-valve. Even if the suction hose comes out from the water many times, when it is put into the water again, the suction starts again within a few seconds. 

The working principle of the pump is not vacuum, it pushes the water up with the help of the propeller and flexible shaft. With these features, it differs from other known pumps in terms of performance and efficiency. 

In addition to firefighting, Kube Pumps can operate smoothly in polluted water, flood water, oiled water, sewage and sea water. 

Kube Pumps have two different unique designed protection systems to prevent any hard metal and similar substances from damaging the pump and engine if they enter the suction hose during operation. 

It can suction from a depth of 10 meters. Although the term “suction” is used, thanks to our patented system, it carries the water up with the impeller without the need for vacuum. Thanks to this special mechanical working system, there is no flow loss up to a suction depth of 6 meters. 

Since there is no mechanical seal inside the pumps, it has the ability to work without water. Dry operation does not cause any damage to the pump and engine. 

Kube Pump has a long-lasting working performance with its pumps produced with advanced aluminum injection molding technology and painted with electrostatic powder paint, for which additional precautions are taken against corrosion. 

Kube Pump has TS EN 14466 and ISO 9001 certificates.